| Issue | Title | |
|---|---|---|
| Vol 30, No 1 (2015): Metalurgi Vol.30 No.1 APRIL 2015 | Pengaruh Kualitas Air Dari Waduk Jatiluhur Sebagai Pendingin Terhadap Korosi Pada Unit Penukar Panas [Effects Of Water Quality Of Reservoir Jatiluhur As To Corrosion On Cooling Unit Heat Exchanger] | Abstract PDF (Bahasa Indonesia) |
| Saefudin Saefudin | ||
| Vol 34, No 3 (2019): Metalurgi Vol. 34 No. 3 Desember 2019 | PENGARUH MATERIAL COUNTER ELECTRODE PADA DYE-SENSITIZED SOLAR CELL | Abstract PDF |
| Natalita Maulani Nursam | ||
| Vol 30, No 3 (2015): Metalurgi Vol. 30 No. 3 Desember 2015 | Pengaruh Mo dan Ni terhadap Struktur Mikro dan Kekerasan Baja Tahan Karat Martensitik 13Cr [The Effect of Mo And Ni on The Microstructure and Mechanical Properties of 13Cr Martensitic Stainless Steels] | Abstract PDF (Bahasa Indonesia) |
| Efendi Mabruri | ||
| Vol 33, No 3 (2018): Metalurgi Vol. 33 No. 3 Desember 2018 | Pengaruh Pemesinan Milling Terhadap Kekasaran Permukaan Baja Tahan Karat Martensitik Modifikasi Aisi 410 3Mo – 3Ni dan Keausan Material Cutter End Mill [Effect of Milling Machining on Surface Roughness of AISI 410 3Mo-3Ni Martensitic Stainless Steel and W | Abstract PDF (Bahasa Indonesia) |
| Moch. Syaiful Anwar, Hady Zhakwan Nugroho, Slamet Wiyono, Efendi Mabruri | ||
| Vol 31, No 3 (2016): Metalurgi Vol. 31 No. 3 Desember 2016 | Pengaruh Penambahan Inhibitor Ekstrak Tembakau Terhadap Laju Korosi Internal Pipa API 5L X-52 Pada Artificial Brine Water Dengan Injeksi Gas CO2 [Effect of Addition of Extracted Tobacco Inhibitor to The Corrosion Rate of Internal Steel Pipe API 5L X-52 in Artificial Brine Water With CO2 Gas Injection] | Abstract PDF (Bahasa Indonesia) |
| Rapli Nur Ahmadi, Soesaptri Oediyani, Gadang Priyotomo | ||
| Vol 31, No 3 (2016): Metalurgi Vol. 31 No. 3 Desember 2016 | Pengaruh Penambahan Karbon Dan Nitrogen Terhadap Mikrostruktur, Kekuatan Tarik Dan Mampu Bentuk Paduan Co-28Cr-6Mo-0,8Si-0,8Mn-0,4Fe-0,2Ni [Influence of Additional Carbon And Nitrogen on Microstructure, Tensile Strength And Workability of Co- 28Cr-6Mo-0,8Si-0,8Mn-0,4Fe-0,2Ni] | Abstract PDF (Bahasa Indonesia) |
| Fendy Rokhmanto, Bambang Soegijono, Ika Kartika | ||
| Vol 35, No 3 (2020): Metalurgi Vol. 35 No. 3 Desember2020 | PENGARUH PENAMBAHAN MAGNESIUM TERHADAP SIFAT MEKANIK, MIKROSTRUKTUR DAN ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY POLIMER PLA/ABS UNTUK MATERIAL IMPLAN BIOABSORBABEL | Abstract PDF |
| Aprilia Erryani | ||
| Vol 27, No 2 (2012): Metalurgi Vol. 27 No. 2 Agustus 2012 | PENGARUH PENAMBAHAN MANGAN TERHADAP SIFAT MAMPU TEMPA PADUAN Co-35Cr-5Mo UNTUK APLIKASI IMPLAN | Abstract PDF PDF (Bahasa Indonesia) |
| Ika Kartika | ||
| Vol 37, No 2 (2022): Metalurgi Vol. 37 No. 2 Agustus 2022 | Pengaruh Penambahan Nd2O3 dan Fe2O3 Pada Sistem Elektrolit Padat Gadolinia Doped Ceria (GDC) Untuk Aplikasi Sel Bahan Bakar Oksida Padat Suhu Menengah [Effect of Nd2O3 and Fe2O3 Addition on Gadolinia Doped Ceria (GDC) Solid Electrolyte System For IT-SOFC] | Abstract PDF |
| Muhammad Faisal Akbar, Bonita Dilasari, Syoni Soepriyanto, Dadan Suhendar | ||
| Vol 26, No 1 (2011): Metalurgi Vol. 26 No. 1 April 2011 | PENGARUH PENAMBAHAN SERAT POLYVINYL ALCOHOL DAN SUPERPLASTISIZER POLYCARBOXYLATE ETHERS TERHADAP SIFAT MEKANIK MATERIAL ECC | Abstract PDF (Bahasa Indonesia) |
| Harsisto Sadjuri | ||
| Vol 30, No 3 (2015): Metalurgi Vol. 30 No. 3 Desember 2015 | PENGARUH PENCAMPURAN DAN RASIO PREKURSOR/DOPAN DALAM PEMBUATAN LAPISAN TIPIS FLUORINE DOPED TIN OXIDE (FTO) BERBASIS TIMAH (II) KLORIDA[The Effect of Mixing Condition and Dopant/Precursor Ratio in Fabrication of Fluorine Doped Tin Oxide (FTO) Thin Film Based on Tin (II) Chloride] | Abstract PDF (Bahasa Indonesia) |
| Latifa Hanum Lalasari | ||
| Vol 36, No 1 (2021): Metalurgi Vol. 36 No. 1 April 2021 | PENGARUH PENEMPAAN DAN PERLAKUAN PANAS TERHADAP SIFAT MEKANIK DAN KETAHANAN KOROSI PADA MODIFIKASI BAJA LATERIT A-588 | Abstract PDF |
| Miftakhur - Rohmah | ||
| Vol 35, No 3 (2020): Metalurgi Vol. 35 No. 3 Desember2020 | PENGARUH PERLAKUAN HIDROTERMAL TERHADAP MORFOLOGI, SIFAT OPTIK DAN SIFAT LISTRIK LAPISAN TIPIS NANORODS ZNO | Abstract PDF |
| Lalu Suhaimi | ||
| Vol 30, No 1 (2015): Metalurgi Vol.30 No.1 APRIL 2015 | PENGARUH PROSES IN-SERVICE WELDING PADA NILAI KEKERASAN SAMBUNGAN [Influence Of In – Service Welding Process On Joining Metal Hardness Value ] | Abstract PDF (Bahasa Indonesia) |
| Erie Martides | ||
| Vol 33, No 3 (2018): Metalurgi Vol. 33 No. 3 Desember 2018 | Pengaruh Proses Perlakuan Panas terhadap Nilai Kekerasan Metal Matrix Composite Coating pada Substrat SS316 untuk Aplikasi Pipa Boiler [The Effect of Heat Treatment Process on Hardness Value of Metal Matrix Composite Coating on SS316 Substrate for Boiler] | Abstract PDF (Bahasa Indonesia) |
| erie martides | ||
| Vol 32, No 1 (2017): Metalurgi Vol. 32 No. 1 April 2017 | Pengaruh Proses Tempering Ganda Terhadap Sifat Mekanik Material Baja Cor Paduan Ni-Cr-Mo [The Influence of Double Tempering on Mechanical Properties of Ni-Cr-Mo Cast Steel Alloy] | Abstract PDF (Bahasa Indonesia) |
| Beny Bandanadjaja, Dewi Idamayanti | ||
| Vol 32, No 2 (2017): Metalurgi Vol. 32 No. 2 Agustus 2017 | Pengaruh Rapat Arus dan Waktu Pelapisan Nikel pada AISI 410 dengan Metode Pulse Electrodeposition terhadap Strukturmikro dan Laju Korosi [The Influences of Current Density and Time on Microstructure and Corrosion Rate Nickel Coating in Aisi 410 by Pulse Electro Deposition Method] | Abstract PDF (Bahasa Indonesia) |
| Rivaldo Ramadhana Saputra, Soesaptri Oediyani, Yulinda Lestari, Efendi Mabruri | ||
| Vol 32, No 2 (2017): Metalurgi Vol. 32 No. 2 Agustus 2017 | Pengaruh Substrat Terhadap Kekerasan Lapisan NiCoCrAlY Yang Terdeposisi Dengan Teknik HVOF[Effect of Different Substrate on Hardness Properties of NiCoCrAlY Coatings Deposited by HVOF Technique] | Abstract PDF |
| Resetiana Dwi Desiati, Eni Sugiarti, Endro Junianto, Erie Martides, Budi Prawara | ||
| Vol 31, No 2 (2016): Metalurgi Vol. 31 No. 2 Agustus 2016 | Pengaruh Suhu Dan Persentase Reduksi Terhadap Limit Drawing Ratio (LDR) Pada Proses Metal Forming Paduan 70Cu-30Zn [Effect of Temperature and Reduction Percentage to Limit Drawing Ratio (LDR) on Metal Forming of 70Cu-30Zn Alloy] | Abstract PDF (Bahasa Indonesia) |
| Amin Suhadi, Eka Febriyanti, Tri Handayani, Rini Riastuti | ||
| Vol 32, No 1 (2017): Metalurgi Vol. 32 No. 1 April 2017 | Pengaruh Suhu dan Waktu Tempering Terhadap Kekerasan, Struktur Mikro, dan Laju Korosi Baja Tahan Karat Martensitik 13Cr3Mo3Ni [The Influence of Time and Temperature Tempering on Hardness, Microstructure and Corrosion Rate of 13Cr3Mo3Ni Stainless Steel] | Abstract PDF (Bahasa Indonesia) |
| Hadi Perdana, Moch Syaiful Anwar, Andinnie Juniarsih, Efendi Mabruri | ||
| Vol 30, No 3 (2015): Metalurgi Vol. 30 No. 3 Desember 2015 | PENGARUH THERMOMECHANICAL CONTROLLED PROCESSED (TMCP) TERHADAP PENGHALUSAN BUTIR DAN SIFAT MEKANIK PADUAN Cu-Zn 70/30[Influence of Thermomechanical Controlled Process on the Grain Size and Mechanical Properties of Cu-Zn 70/30] | Abstract PDF (Bahasa Indonesia) |
| Eka Febriyanti | ||
| Vol 30, No 3 (2015): Metalurgi Vol. 30 No. 3 Desember 2015 | PENGARUH UKURAN BUTIRAN TERHADAP STRUKTUR KRISTAL PADA PROSES KALSINASI PARSIAL DOLOMIT [Effect of Particles Size to Crystal Structure in Partial Calcination Process of Dolomite] | Abstract PDF (Bahasa Indonesia) |
| eko sulistiyono, eko sulistiyono | ||
| Vol 32, No 1 (2017): Metalurgi Vol. 32 No. 1 April 2017 | Pengaruh Waktu Deposisi dan Temperatur Substrat Terhadap Pembuatan Kaca Konduktif FTO (Fluorine doped Tin Oxide) [The Influence of Deposition Time and Substrate Temperature in Manufacturing Process of FTO (Fluorine doped Tin Oxide) Conductive Glass] | Abstract PDF (Bahasa Indonesia) |
| Tri Arini, Latifa Hanum Lalasari, Akhmad Herman Yuwono, F Firdiyono, Lia Andriyah, Achmad Subhan | ||
| Vol 32, No 3 (2017): Metalurgi Vol. 32 No. 3 Desember 2017 | Pengaruh Waktu Milling Terhadap Mikrostruktur dan Sifat Magnetik Komposit NiFe2O4-NdFeO3 [Influence Of Milling Time on Microstructure and Magnetic Properties of NiFe2O4-NdFeO3 Composite] | Abstract PDF (Bahasa Indonesia) |
| Ade Mulyawan, Yunasfi Yunasfi, Wisnu Ari Adi | ||
| Vol 27, No 1 (2012): Metalurgi Vol. 27 No. 1 April 2012 | PENGARUH WAKTU PELINDIAN PADA PROSES PEMURNIAN SILIKON TINGKAT METALURGI MENGGUNAKAN LARUTAN HCl | Abstract |
| Bintang Adjiantoro | ||
| Vol 27, No 1 (2012): Metalurgi Vol. 27 No. 1 April 2012 | PENGARUH WAKTU PELINDIAN PADA PROSES PEMURNIAN SILIKON TINGKAT METALURGI MENGGUNAKAN LARUTAN HCl | Abstract |
| Bintang Adjiantoro | ||
| Vol 27, No 1 (2012): Metalurgi Vol. 27 No. 1 April 2012 | PENGARUH WAKTU PELINDIAN PADA PROSES PEMURNIAN SILIKON TINGKAT METALURGI MENGGUNAKAN LARUTAN HCl | Abstract PDF |
| Bintang Adjiantoro, Efendi Mabruri | ||
| Vol 34, No 2 (2019): Metalurgi Vol. 34 No. 2 Agustus 2019 | Penggunaan Metode Free Settler Pada Proses Perhitungan Ukuran Butiran Magnesium Karbonat Menggunakan Persamaan Stokes [Study of Magnesium Carbonate Particle Size Measurement from Carbonation Process with Free Settler Method] | Abstract PDF |
| Ayu Dwi Priyanti | ||
| Vol 35, No 2 (2020): Metalurgi Vol. 35 No. 2 Agustus 2020 | PENGKAYAAN UNSUR YTTRIUM DAN CERIUM PADA TERAK TIMAH BANGKA: ANALISIS TERMODINAMIKA | Abstract PDF |
| Sulaksana Permana, Debby Rachel, Agus Budi Prasetyo, Rafdi Abdul Majid, Wahyu Kartika, Iwan Susanto, Johny Wahyuadi M | ||
| Vol 26, No 3 (2011): Metalurgi Vol. 26 No. 3 Desember 2011 | PENGUATAN TEMBAGA MURNI DENGAN TEKNIK EQUAL CHANNEL ANGULAR PRESSING | Abstract PDF (Bahasa Indonesia) |
| Solihin Solihin, Efendi Mabruri, I Nyoman Gede Putrayasa | ||
| Vol 31, No 1 (2016): Metalurgi Vol. 31 No. 1 April 2016 | Pengujian Dan Analisis Metalurgi Terhadap Cacat Yang Terbentuk Pada Dinding Bagian Dalam Lubang Utama Sebuah Aileron Block Hasil Proses Permesinan [Metallurgical Assesment of A Broken Gearbox Intermediate Shaft of A Reciprocating Compressor] | Abstract PDF (Bahasa Indonesia) |
| D.N. Adnyana | ||
| Vol 31, No 2 (2016): Metalurgi Vol. 31 No. 2 Agustus 2016 | Peningkatan Kadar Nikel Dalam Laterit Jenis Limonit Dengan Cara Peletasi, Pemanggangan Reduksi Dan Pemisahan Magnet Campuran Bijih, Batu Bara, Dan Na2SO4 [Upgrading of Nickel Content in The Limonitic Laterite Ores by Pelletizing, Reduction Roasting and Magnetic Separation of The Mixed Ores, Coal and Sodium Sulphate] | Abstract PDF (Bahasa Indonesia) |
| Rudi Subagja, Agus Budi Prasetyo, Wahyu Mayang Sari | ||
| Vol 26, No 3 (2011): Metalurgi Vol. 26 No. 3 Desember 2011 | PENINGKATAN KADAR NIKEL (Ni) DAN BESI (Fe) DARI BIJIH NIKEL LATERIT KADAR RENDAH JENIS SAPROLIT UNTUK BAHAN BAKU NICKEL CONTAINING PIG IRON (NCPI/NPI) | Abstract PDF (Bahasa Indonesia) |
| Agus Budi Prasetyo, Puguh Prasetyo | ||
| Vol 32, No 3 (2017): Metalurgi Vol. 32 No. 3 Desember 2017 | Peningkatan Ketahanan Aus pada Baja Tahan Karat Martensitik 13Cr AISI 410 setelah Proses Austenisasi dan Tempering [Improvement of Wear Resistance of 13Cr AISI 410 Martensitic Stainless Steel after Austenitizing and Tempering Process] | Abstract PDF (Bahasa Indonesia) |
| Annisa Siti Apriani, Moch. Syaiful Anwar, Rusnaldy Rusnaldy, Efendi Mabruri | ||
| Vol 26, No 2 (2011): Metalurgi Vol.26 No.2 Agustus 2011 | PERANAN UNSUR REFRAKTORI DIDALAM NICKEL-BASED SUPERALLOYS: SUATU REVIEW[ | Abstract PDF (Bahasa Indonesia) |
| Efendi Mabruri | ||
| Vol 26, No 3 (2011): Metalurgi Vol. 26 No. 3 Desember 2011 | PERCOBAAN PEMBUATAN FASA INTERMETALIK Nb3Sn DENGAN PROSES SINTERING LOGAM NIOBIUM (Nb) DAN TIMAH (Sn) | Abstract PDF (Bahasa Indonesia) |
| Florentinus Firdiyono, Andika Widya Pramono, Pius Sebleku, Nurhayati Indah Ciptasari, Anton Suryantoro | ||
| Vol 26, No 2 (2011): Metalurgi Vol.26 No.2 Agustus 2011 | PERCOBAAN PENGERASAN PERMUKAAN KOMPONEN GERUS ATTRITION MILL | Abstract PDF (Bahasa Indonesia) |
| Yusuf M | ||
| Vol 27, No 1 (2012): Metalurgi Vol. 27 No. 1 April 2012 | PERCOBAAN PENGISIAN-PENGELUARAN HIDROGEN SEBUAH TANGKI SIMPAN HIDROGEN PADAT | Abstract PDF (Bahasa Indonesia) |
| Hadi Suwarno | ||
| Vol 26, No 1 (2011): Metalurgi Vol. 26 No. 1 April 2011 | PERCOBAAN PENINGKATAN KADAR MANGAN MENGGUNAKAN MAGNETIC SEPARATOR | Abstract PDF (Bahasa Indonesia) |
| Immanuel Ginting | ||
| Vol 26, No 2 (2011): Metalurgi Vol.26 No.2 Agustus 2011 | PEREKAYASAAN ALAT SIMULASI REDUKSI PELET BIJIH BESI BERKARBON[ | Abstract PDF (Bahasa Indonesia) |
| Edi Herianto | ||
| Vol 34, No 2 (2019): Metalurgi Vol. 34 No. 2 Agustus 2019 | Performa Korosi Baja Karbon Pada Uji Simulasi Pipa Untuk Sistem Saluran Air Pendingin [Corrosion Performance of Carbon Steel in Pipe Simulation Test for Cooling Water Systems] | Abstract PDF |
| Ahmad Royani | ||
| Vol 31, No 2 (2016): Metalurgi Vol. 31 No. 2 Agustus 2016 | Perilaku Adsorpsi Emas Dari Larutan Ammonium Thiosulfat Dengan Karbon Aktif Dan Resin Penukar Ion [Study of Adsorption Behaviour of Gold from Thiosulfate Solution onto Activated Carbon and Ion Exchange Resin] | Abstract PDF (Bahasa Indonesia) |
| Wahyudin Prawira M, M Zaki Mubarok | ||
| Vol 31, No 1 (2016): Metalurgi Vol. 31 No. 1 April 2016 | Perubahan Fasa Dalam Pembuatan Serbuk LiFePO4 Dengan Tiga Tahap Perlakuan Panas Tanpa Pelapisan Karbon [Phase Change In LiFePO4 Powder Making With Three Step Heat Treatment Non-Carbon Coating] | Abstract PDF (Bahasa Indonesia) |
| R. Ibrahim Purawiardi, Christin Rina Ratri, Endang Suwandi | ||
| Vol 26, No 3 (2011): Metalurgi Vol. 26 No. 3 Desember 2011 | PRELIMINARY STUDY OF ELASTICITY ON BINARY ALLOY | Abstract PDF (Bahasa Indonesia) |
| Andika Widya Pramono, Anton Suryantoro | ||
| Vol 37, No 2 (2022): Metalurgi Vol. 37 No. 2 Agustus 2022 | PRELIMINARY STUDY OF MATERIAL PROPERTIES ON PU-MG-ZN FOR ANEURYSM CLIP APPLICATION | Abstract PDF |
| Made Subekti Dwijaya, Talitha Asmaria | ||
| Vol 30, No 2 (2015): Metalurgi Vol.30 No.2 Agustus 2015 | PREPARASI, SINTESIS Dan KARAKTERISASI MATERIAL CaMnO3 [Preparation, Synthesis and Characterization of CaMnO3 Material] | Abstract PDF (Bahasa Indonesia) |
| Sigit Dwi Yudanto | ||
| Vol 30, No 1 (2015): Metalurgi Vol.30 No.1 APRIL 2015 | PREPARASI, SINTESIS DAN KARAKTERISASI MATERIAL OKSIDA Ca3Co4O9 [Preparation, Synthesis and Characterization Of Ca3Co4O9 Oxide Material] | Abstract PDF (Bahasa Indonesia) |
| Sigit Dwi Yudhanto | ||
| Vol 36, No 3 (2021): Metalurgi Vol. 36 No. 3 Desember 2021 | PRODUKSI BESI DAN TERAK TITANIUM KADAR TINGGI DARI KONSENTRAT PASIR BESI ATAU TITANOMAGNETIT: ULASAN LITERATUR [PRODUCTION OF IRON AND HIGH PURITY TITANIUM SLAG FROM IRON SAND OR TITANOMAGNETITE CONCENTRATE: LITERATURE REVIEW] | Abstract PDF |
| Safira Fitri, Zulfiadi Zulhan, Imam Santoso | ||
| Vol 30, No 3 (2015): Metalurgi Vol. 30 No. 3 Desember 2015 | PROSES PENGAMBILAN UNSUR MANGAN DAN BESI DARI HASIL SAMPING PENGOLAHAN BIJIH MANGAN TASIKMALAYA[Extraction of Manganese and Iron From Waste Treatment of Tasikmalaya Manganese Ore] | Abstract PDF (Bahasa Indonesia) |
| Ariyo Suharyanto, Eko Sulistiyono | ||
| Vol 31, No 1 (2016): Metalurgi Vol. 31 No. 1 April 2016 | Proses Reduksi Selektif Bijih Nikel Limonit Menggunakan Zat Aditif CaSO4 [Selective Reduction Process of Nickel Limonite With Adictive CaSO4] | Abstract PDF (Bahasa Indonesia) |
| Wahyu Mayangsari, Agus Budi Prasetyo | ||
| Vol 34, No 3 (2019): Metalurgi Vol. 34 No. 3 Desember 2019 | RANCANGAN PROSES MATERIAL AISI 4140 UNTUK MENINGKATKAN KUALITAS DIFFUSER YANG AUS KARENA BEBAN EROSI | Abstract PDF (Bahasa Indonesia) |
| Beny Bandanadjaja, Dewi Idamayanti, Rinaldy Alviana Hanafi | ||
| Vol 34, No 3 (2019): Metalurgi Vol. 34 No. 3 Desember 2019 | Reaksi Karbotermik Nickeliferous Sintetik dengan Campuran Batubara Subbituminous dan Sulfur Kadar Tinggi | Abstract PDF |
| iwan setiawan | ||
| Vol 38, No 1 (2023): Metalurgi Vol. 38 No. 1 2023 | Recovery of Manganese from Manganese Ore Reductive Acid Leaching Process Using Reeds (Imperata Cylindrica) as Reducing Agent | Abstract PDF |
| Lalu Suhaimi, Samsul Bahtiar, Andi Sarina, Khairunnisya Khairunnisya | ||
| Vol 34, No 2 (2019): Metalurgi Vol. 34 No. 2 Agustus 2019 | Reduksi Bijih Besi Lampung Memanfaatkan Reduktor Gas Produser Model Hasil Gasifikasi Biomassa [Reduction of Lampung Iron Ore Using Producer Gas Model Reductor] | Abstract PDF |
| Suharto suharto | ||
| Vol 38, No 3 (2023): Metalurgi Vol. 38 No. 3 2023 | Residual Stress Measurement of Used Mining Dump Truck Frame for Remanufacturing Purposes | Abstract PDF |
| David Ferdiyanto, Nofrijon Sofyan, Akhmad Herman Yuwono, Donanta Dhaneswara | ||
| Vol 34, No 2 (2019): Metalurgi Vol. 34 No. 2 Agustus 2019 | SIFAT MEKANIK DAN STRUKTUR MIKRO PADUAN MAGNESIUM BERPORI DENGAN VARIASI KOMPOSISI AGEN PENGEMBANG DAN TEMPERATUR SINTER UNTUK APLIKASI IMPLAN MAMPU LURUH | Abstract PDF |
| Aprilia Erryani | ||
| Vol 35, No 2 (2020): Metalurgi Vol. 35 No. 2 Agustus 2020 | SINTESA AL2O3 DARI SERBUK BOEHMITE MENGGUNAKAN TEKNIK SPARK PLASMA SINTERING (SPS): STUDI TRANSFORMASI FASA, MIKROSTRUKTUR DAN KEKERASAN | Abstract PDF |
| Diastati Puspita Ning Ayu, Bambang Hermanto, Arif Tjahjono, Toto Sudiro | ||
| Vol 35, No 2 (2020): Metalurgi Vol. 35 No. 2 Agustus 2020 | Sintesis dan Karakterisasi Material Nano-Perovskite Neodymium Iron Oxide (NdFeO3) | Abstract PDF |
| Rina Dewi Mayasari | ||
| Vol 33, No 2 (2018): Metalurgi Vol. 33 No. 2 Agustus 2018 | Sintesis Li1,37Mn2O4 Dengan Metoda Solid-State Reaction dan Hidrothermal (Synthesis of Li1,37Mn2O4 by Using Solid State Reaction and Hydrothermal Methods) | Abstract PDF (Bahasa Indonesia) |
| Etty Wigayati, Ibrahim Purawiardi | ||
| Vol 30, No 2 (2015): Metalurgi Vol.30 No.2 Agustus 2015 | SINTESIS LiBOB DAN ANALISA STRUKTUR KRISTALNYA [Synthesis and Analysis Crystalline Structure LiBOB] | Abstract PDF (Bahasa Indonesia) |
| etty marti wigayati | ||
| 241 - 300 of 332 Items | << < 1 2 3 4 5 6 > >> | |
Profile
Certificate (SINTA 2)
.png)
Template
User
Information
Language
