.png)
Email this article GRAIN GROWTH KINETICS OF AUSTENITIC STAINLESS STEEL 316L AND THE RELATIONS BETWEEN GRAIN SIZES AND HARDNESS UNDER ISOTHERMAL CONDITIONS
Abstract
Full Text:
PDFReferences
M. El-Tahawy, Y. Huang, T. Um, H. Choe, J. L. Lábár, T.G. Langdon and J. Gubicza, “Stored energy in ultrafine-grained 316L stainless steel processed by high-pressure torsion,” Journal of Materials Research and Technology, vol. 6 (4), pp. 339-347, 2017.
S. Illescas, J. Fernández and J. M. Guilemany, “Kinetic analysis of the austenitic grain growth in HSLA steel with low carbon content,” Materials Letters, vol. 62 (60), pp. 3478-3480, 2008.
W. D. Callister and D. G. Rethwisch. Materials Science and Engineering, An Introduction, 7th ed., John Wiley & Sons, Inc, 2007, pp. 229-243.
A. Järvenpää, M. Jaskari, A. Kisko, P. Karjalainen,” Processing and properties of reversion-treated,” Metals, Vol. 10. 281, 2020.
X. Li, Y. Wei, Z. Wei, J. Zhou,” Effect of cold rolling on microstructure and mechanical properties of AISI 304N stainless steel,” IOP Conf. Series: Earth and Environmental Science 252, Chongqing, 2019
P. Behjati, A. Kermanpur, A. Najafizadeh, H. Samaei Baghbadorani, “Effect of annealing temperature on nano/ultrafine grain of Ni-free,” Materials Science & Engineering A, 592, 77–82, 2014
Z. Jiang, Z. Zhang, H. Li, Z. Li, Q. Ma, “Microstructural evolution and mechanical properties of aging high nitrogen austenitic stainless steels,” International Journal of Minerals, Metallurgy and Materials, vol. 17, number 6, pp. 729-736, 2010
M. Tikhonova, R. Kaibyshev, A. Belyakov, “Microstructure and mechanical properties of austenitic stainless steels after dynamic and post-dynamic recrystallization treatment,” Advanced Engineering Materials, 1700960, 2018
M. Wang, Y. Bu, Z. Dai, S. Zeng, “Characterization of grain size in 316L stainless steel using the attenuation of rayleigh wave measured by air-coupled transducer,” Materials, 14, 1901, 2021
M. F. Mat, Y. H. P. Manurung, N. Muhammad, S. N. S. Ahmad, M. Graf, M. S. Sulaiman, “Variable analysis for grain size prediction of austenitic stainless steel SS316L using heat treatment,” Journal of Applied Sciences, 20, 3, pp. 91-96, 2020
Q. Xue, E. K. Cerreta and G. T. Gray, “Microstructural characteristics of post-shear localization in cold-rolled 316L stainless steel,” Acta Materialia, vol. 55 (2), pp. 691-704, 2007.
Y. C. Huang, C. H. Su, S. K. Wu and C. Lin, “A Study on the Hall–Petch Relationship and Grain Growth Kinetics in FCC-Structured High/Medium Entropy Alloys,” Entropy, vol. 21 (3), pp. 297, 2019.
M. K. Banerjee, ”Fundamentals of Heat Treating Metals Alloy,” in Comprehensive Material Finishing, vol. 2, Elsevier Inc, 2017, pp. 1-49.
R. Rong, W. Yucheng, T. Wenming, W. Fengtao, W. Tugen and Z. Zhixiang, “Synthesis and grain growth kinetics of in situ FeAl matrix nanocomposites (II),” Trans. Nonferrous Met. Soc. China, vol. 18, pp. 66–71, 2008.
C. Yue, L. Zhang, S. Liao and H. Gao, ”Kinetic analysis of the austenite grain growth in GCr15 steel,” Journal of Materials Engineering and Performance, vol. 19, no. 1, pp. 112-115, 2009.
W. D. Callister and D. G. Rethwisch. Materials Science and Engineering, An Introduction, 7th ed., John Wiley & Sons, Inc, 2007, pp. 200.
L. Gavard, F. Montheillet and J. Le Coze, ”Recrystallization and grain growth in high purity austenitic stainless steels,” Scripta Materialia, vol. 39 (8), pp. 1095-1099, 1998.
R. A. N. M. Barbosa, “Simulation of hot working of austenitic stainless steels,” Ph.D thesis, University of Sheffield, United of Kingdom, 1983.
D. Priadi, R. Napitupulu, and E. S. Siradj, ”Austenite grain growth calculation of 0.028% Nb steel,” Journal of Mining and Metallurgy, Section B: Metallurgy, vol. 47 (2), pp. 199-209, 2011.
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Refbacks
- There are currently no refbacks.
